General Purpose Motor

The motor frame is crafted with steel. Able to be use in multiple applications being designed as a general-purpose motor. Motor is suited for mounting in any position. Created around NEMA premium efficiency standards with class F insulation. Motors with TR suffix have roller bearings for heavy belted loads. The motor's efficiency at 100% load is 89.5 %efficient. Outputs 5 horsepower, runs at 1750 RPM and covers 3 phases. Common uses in the car wash industry - compressors, pumps, fans, conveyors.

Specification:

• Catalog Number: CEM3218T
  
• Enclosure: OPSB
  
• Frame: 184TC
  
• Frame: Material Steel
  
• Frequency: 60.00 Hz
  
• Output @ Frequency: 5.000 HP @ 60 HZ
  
• Phase: 3
  
• Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
  
• Voltage @ Frequency: 460.0 V @ 60 HZ, 230.0 V @ 60 HZ
  
• XP Class and Group: None
  
• XP Division: Not Applicable
  
• Agency Approvals: UR, CSA EEV, CSA
  
• Ambient Temperature: 40 °C
  
• Auxillary Box: No Auxillary Box
  
• Auxillary Box Lead Termination: None
  
• Base Indicator: Rigid
  
• Bearing Grease Type: Polyrex EM (-20F +300F)
  
• Blower: None
  
• Current @ Voltage: 13.200 A @ 230.0 V, 14.000 A @ 208.0 V, 6.600 A @ 460.0 V
  
• Design Code: B
  
• Drip Cover: No Drip Cover
  
• Duty Rating: CONT
  
• Efficiency @ 100% Load: 89.5 %
  
• Electrically Isolated Bearing: Not Electrically Isolated
  
• Feedback Device: NO FEEDBACK
  
• High Voltage Full Load Amps: 6.6 a
  
• Front Face Code: Standard
  
• Front Shaft Indicator: None
  
• Heater Indicator: No Heater
  
• Insulation Class: F
  
• Inverter Code: Inverter Ready
  
• KVA Code: J
  
• Lifting Lugs: Standard Lifting Lugs
  
• Locked Bearing Indicator: Locked Bearing
  
• Motor Lead Exit: Ko Box
  
• Motor Lead Termination: Flying Leads
  
• Motor Lead Quantity/Wire Size: 9 @ 16 AWG
  
• Motor Type: 3640M
  
• Mounting Arrangement: F1
  
• Number of Poles: 4
  
• Overall Length: 16.50 IN
  
• Power Factor: 80
  
• Product Family: General Purpose
  
• Pulley End Bearing: Type Ball
  
• Pulley Face Code: C-Face
  
• Pulley Shaft Indicator: Standard
  
• Rodent Screen: None
  
• Service Factor: 1.15
  
• Shaft Diameter: 1.125 IN
  
• Shaft Extension Location: Pulley End
  
• Shaft Ground Indicator: No Shaft Grounding
  
• Shaft Rotation: Reversible
  
• Shaft Slinger Indicator: No Slinger
  
• Speed: 1750 rpm
  
• Speed Code: Single Speed
  
• Motor Standards: NEMA
  
• Starting Method: Direct on line
  
• Thermal Device - Bearing: None
  
• Thermal Device - Winding: None
  
• Vibration Sensor Indicator: No Vibration Sensor
  
• Winding Thermal 1: None
  
• Winding Thermal 2: None