Diaphragm pump with a brass head, Buna-N diaphragms, and 17-4 stainless steel valves. 1000 PSI max pressure, 20 GPM max flow rate. Versatile pump that handles a wide range of fluid viscosity and abrasive materials.
The Hydra-Cell H25XKBTHFECA Diaphragm Pump is a sealless diaphragm pump that can pump a wide variety of fluids from low to high viscosity, including abrasive materials. It's simple compact design does nut use seals, packing, or cups, which drastically cuts down on maintenance cost and time. Precision design and manufacturing by Wanner Engineering. This version has a brass head and Buna-N diaphragms.
Specifications:
Flow Rate: 20 GPM (@ 1050 RPM)
Maximum Pressure: 1000 PSI
Maximum Inlet Pressure: 250 PSI
Maximum Operating Temperature: 180° Fahrenheit
Diaphragm & O-Ring Material: Buna-N Nitrile
Valve and Valve Seat Material: 17-4 stainless steel
Valve Spring Material: Elgiloy
Valve Spring Retainers: Celcon
Head Material: Nickel-plated cast iron
Maximum Solids Size: 800 microns
Bearings: Tapered rolling bearings
Inlet Port: 1 1/2" NPT
Discharge Port: 1" NPT
Shaft Diameter: 1 1/8"
Shaft Rotation: Reverse (bi-directional)
Uses standard 10W30 oil
Oil Capacity: 3.3 quarts
Weight: 135 lbs.
Features:
Design with no seals and horizontal disk check valves - pump handles abrasive materials
Question:May I know the current lead time? Thank you
-
ching-han
(08/05/2021)
Response:Please contact our sales department at 800-233-3873 for current stock status and lead time, as it tends to change rapidly.
Question:Have a 5yr old h25 pump and can not get more than 250psi no matter what I set regulator at
-
TERRENCE
(01/21/2021)
Response:You most likely need to install a repair kit. No special tools required.
https://www.kleen-ritecorp.com/p-7946-repair-kit-for-hydra-cell-h25x-pump.aspx