Electric premium efficiency motor with smooth 143TC steel frame. This washdown duty motor withstands the abuse of wet environments while remaining clean and sanitary. 230/460V, 1 HP, 3 PH, 1800 RPM.
NOTE: Product image represents the Sterli-Seal line of pumps but may not be the exact model. Please read all specifications and details carefully before purchasing.
The Sterling NP0014PCA Sterli-Seal Electric Motor is designed to withstand the demands of high-pressure washdown applications like automatic car washes, processing, and other wet industrial environments. The smooth rolled steel frame is not only durable, it eliminates buildup of material to allow for easy cleanup and easy adherence to sanitary requirements. NEMA-approved design is incredibly efficient and long-lasting.
Specifications and Features:
3 phase
1 horsepower
1800 RPM
208-230/460 volt
60 Hz
F/L Amps: 2.8/1.4
85.5% nominal efficiency
143TC frame type
Smooth body rolled steel frame
Totally enclosed fan cooled enclosure (TEFC)
C-face footless
Stainless steel etched nameplate
Cast iron end brackets with drain holes in four quadrants
Incredibly high efficiency - Class F Insulation with a 1.15 service factor
Inverter rated per NEMA MG1-Part 31.4.4.2
Diagonally split and gasketed stamped steel conduit box rotatable in 90 degree increments
CE, CSA listed and energy efficiency verified to US and Canadian Standards, meets IE3 efficiency
Pre-lubricated (sealed) oversized bearings
Internally locked drive end bearing
Lip seals on drive end and opposite drive end brackets
Can be used as a replacement for Sterling NH0014PCA