WMFT Series 103 Watt Wall Fixture - White

The Jarvis WMFT-400-50K-UV-FT-WHT-DM is a forward throw LED wall luminaire from the WMFT series. The traditional forward throw design plus advanced internal optics allow the light to be focused forward and down. Since the light is better utilized and more surface area is illuminated, it's an excellent choice for parking lots and large spaces. Plus, this fixture uses LEDs, so it's perfect if you're looking for a more efficient replacement for old wall lights - and they can be easily retrofitted in most cases.

• Jarvis Manufacturer Number: WMFT-400-50K-UV-FT-WHT-DM
• Power: 103 watts
• Input: 120-277 volt DC, 50/60 Hz, Class 1 drivers
• Lumens: 12,760 lm
• CCT: 5000K
• CRI: Equal or greater than 70
• PF: Equal or greater than .9
• Operating Temperature Range: 40⁰ to 104⁰ Fahrenheit
• Dimming: 0-10V
• Total Harmonic Distortion: Under 20% full load
• Lens: Glass
• Housing: Die-cast aluminum cast from 383 (ADC12) alloy
• Housing Color: White
• Mounting Height Recommendation: 10-15' from ground.
• Forward throw
• ETL listed to UL1598 and UL8750 for both US and Canada
• American Recovery and Reinvestment Act Funding Compliant
• DesignLights Consortium (DLC) qualified product
• State of California Title 24 Compliant when installed in accordance with local requirements
• Rated for wet and dry locations
• Approved for wall-mount use
• Dimensions: 12.9" length x 9" height

• 3D gaskets create reliable seal because they are physically captured
• Glass lens never yellows
• UV-resistant powdercoat finish avoids fading and flaking
• Surge protection included
• Higher efficiency with higher rebates and lower operating costs
• Sized to cover wall scars left by previous lights
• LEDs are separated from power supply for better thermal performance
• Internal aluminum reflector projects additional light outwards of the fixture
• Fasteners are stainless-steel and will not rust or create rust-streaks
• Light fixture automatically reduces power level when operating in higher temperatures to ensure componentry does not overheat. Full power levels are resumed automatically when temperatures return to rated operating range.

• Luminaire installs onto wall by mounting the luminaire's baseplate to the wall. Wall materials and mounting conditions vary by structure and project – contact factory for suggesting which fasteners are optimal. Electrical connections can be brought into the luminaire either through threaded 1/2" NPT knock-outs (located on the sides, top and bottom of the fixture’s baseplate) or by mounting the luminaire over a recessed junction box. Front section of luminaire contains power supply, LEDs and optics. Front section connects to rear section via cast-in hooks and fasteners. Installation conditions often require sealing of fixture penetrations created during installation.