Your shopping cart is currently empty.
Jarvis XBEAM LED CrossBeam Canopy Light, 150 Watts, 20,020 Lumens
Brand:
Mfr. Model #:
XBEAM-600-HO-DM
KR Part #:
LED360-150
Weight:
13.00 lbs
Features CrossBeam optics for widely dispersed and uniform light! 150 Watt power, produces 20,020 lumens. Requires 120-277V 50/60Hz input.
Technical Specifications
Voltage AC: 120-277
Lumens: 20020
Watts: 150
Max Temperature: 113 degrees F
Product Description
Overhead LED Illumination
The Jarvis XBEAM-600-HO-DM canopy light is specifically designed for use in gas station, car wash, and other canopy applications. Each high-output luminaire has four LED lights, one per corner, angled in and down to send the most intense light out into a wide pattern that creates a uniformly lit site. CrossBeam™ optics feature a wider light pattern, improving your site's visibility from the road.
LEDs are housed in a white coated, die-cast alloy housing for maximum durability outdoors. The light is suitable for use at temperatures between -40° and 113° F and will reduce power levels if operating in high temperatures to protect internal components. The XBEAM light is compatible with most controls including motion sensors and photosensors.
- For any canopy lighting needs!
- Four LEDs send out crossing beams of light to create focused yet even illumination
- Use in wet or dry locations
- White coated body resists UV degradation
- Operating voltage: 120-277 V
- 150 watts
- 20,020 lumens (5000K CCT)
Product Reviews
Frequently Asked Questions
Question:how is it mounted? i have standard 3" round electircal box with 2 screw points. can it be mounted there?
-
Trent
(10/14/2023)
Response:per installation instructions: Luminaire installs into standard 12” and 16” canopy deck pans by drilling a 2” hole in the center of the location where the luminaire is to be installed. Luminaire is attached to canopy using stainless-steel self-tapping screws (provided with luminaire.) Integrated gaskets on top side of luminaire automatically seal canopy during most installations.
XBEAM series features a ¾” NPT female threaded connection on top of the fixture. Luminaire is provided with 10” of wire exiting through this sealed connection. Typical wiring method is to attach a 4” conduit section to this threaded connection and to install a weatherproof box on top of this conduit. Electrical connections are made inside weatherproof box.
